Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 41 items
Hyperspectral camera that can simultaneously measure information in the visible and near-infrared regions, allowing for combination.
HERA VIS-SWIR can capture hyperspectral images with 1.3 million pixels over an ultra-wideband spectral range (400-1700nm). It can simultaneously measure and combine information from the visible light range and the near-infrared range of short-wavelength infrared.
The imaging spectrometer (ImSpector) allows for the measurement of spectral data for all points in the observation field.
● Line Spectroscopy with the Imaging Spectrometer ImSpector By using an imaging spectrometer, it is possible to rapidly measure spectral data across the entire observation field. ● Use of a high-sensitivity camera for the detector By employing a high-sensitivity camera as the detector, it is possible to minimize light damage to the sample caused by the illumination light during measurement. ● Spectral camera unit can be connected to the microscope camera port Since it can be connected to a C-mount camera port, it can be installed on your existing microscope. ● Additional intermediate tube allows for the installation of an observation camera (optional equipment) By adding an intermediate tube to the microscope, it is possible to install an observation camera in addition to the imaging spectrometer camera. This enables the measurement of spectral data at targeted positions while conducting microscope observations.
Hyperspectral Camera SWIR
This is a hyperspectral camera sensitive to the shortwave infrared (SWIR) wavelength range of 1000 to 2500 nm. It can capture full-resolution spectral images at 450 frames per second with a resolution of 384 x 288 pixels (spatial axis x wavelength axis). Combined with a dedicated special optical objective lens, it enables precise and high-sensitivity spectral analysis. Applications: chemical industry, pharmaceuticals, recycling, mineral resources, food, agriculture, etc.
It can operate in line scan mode and collect hyperspectral data in the mid-infrared NIR range (2.7 to 5.3 μm).
The Specim FX50 is a high-speed, accurate, and efficient mid-infrared (MWIR) hyperspectral camera designed for industrial applications. It can sort black plastics, which are considered difficult to identify and classify, and can quickly and reliably analyze hydrocarbons and minerals, as well as detect contamination on metal surfaces. The Specim FX50 is most suitable for the following applications: • Quality of food and feed • Waste sorting • Recycling • Moisture measurement, etc.
Hyperspectral Camera LWIR
8-12μm long-wave infrared (LWIR) hyperspectral camera. The spectral camera can obtain hyperspectral images of several tens to hundreds of wavelengths simultaneously in regular image data. This creates new possibilities for utilizing standard image processing techniques in the field of spectroscopy. The full spectrum recorded as an image at each pixel of the camera's sensor can be used in various applications such as material classification, detection of specific substances, color measurement, and quantitative chemistry.
The hyperspectral camera Specim FX17 can collect hyperspectral data in the near-infrared (NIR) range (900 to 1700 nm).
Specim FX17 is most suitable for the following applications: • Quality of food and feed • Waste sorting • Recycling • Moisture measurement, etc.
[Compact × High Performance] Proven results in component analysis, quality control, and research applications! Accommodates various measurement needs.
■ Line scan type hyperspectral camera ■ Compact and lightweight for easy field measurements ■ Acquires spectral data for each image pixel. ■ Abundant accessories to enhance measurements ≪Measurement wavelength range product lineup≫ ・330–800nm ・400–1000nm ・420–980nm ・900–1700nm ・1000–2500nm 《Configuration items》 ■ Benchtop system (for research) Hyperspectral camera Movable stage Tower Lighting Software (capture and analysis) Dedicated PC ■ Field system (for outdoor shooting) Hyperspectral camera Rotating scanning stage Tripod tray for dedicated laptop Battery Software (capture and analysis) Dedicated laptop
Corresponding to visible to near-infrared (up to 2500nm). A hyperspectral camera suitable for remote sensing, resource exploration, and research applications with high sensitivity and low noise.
The HySpex series hyperspectral cameras can be used for field, lab, and airborne system applications. ■ High S/N ratio ■ High spatial resolution and frame rate ■ Product lineup compatible with visible and near-infrared wavelength ranges (400–1000nm / 930–2500nm / 960–2500nm) ■ A wide range of accessories tailored to shooting conditions Suggestions available for aircraft, lab, and field systems (stages, navigation systems, dedicated tripods, etc.)
Covers UV to NIR from 350 to 1000 nm with a single device. Introduces light field technology. Provides high-resolution imaging data.
The "Hyperspectral Camera ULTRIS X20" is an innovative hyperspectral camera based on light field technology. It is equipped with a 20MP CMOS sensor, allowing for the acquisition of high-resolution data. The "ULTRIS X20" has an expanded measurement wavelength range compared to the conventional model "ULTRIS 20," now covering a wide range of wavelengths from 350 to 1000 nm, from ultraviolet to near-infrared, all in one device. 《 Features of ULTRIS X20 》 - Capable of capturing hyperspectral imaging data in video format - Measurement wavelength range: 350-1000 nm, 164 spectral bands - High resolution - 410×410 pixels - Compact (60 × 60 × 57 mm), lightweight (350 g) (standard model S20) - Robust housing compliant with IP standards - Capable of underwater shooting With its compact and lightweight design, it can be mounted on general drones. The 164 spectral bands and high spatial resolution of 410×410 pixels make it suitable for a wide range of applications, not only in laboratories and fields but also in UAV applications.
Covers 350~1000nm with a single unit. A high-resolution, snapshot-type hyperspectral camera specifically designed for UAVs.
The "Hyperspectral Camera ULTRIS X20 Plus" is a hyperspectral camera designed specifically for UAVs, which adds a pan-sharpening method to the "ULTRIS X20," a hyperspectral camera based on light field technology. It has a wider measurement wavelength range than conventional models, capable of covering a broad spectrum from ultraviolet to near-infrared, specifically from 350 to 1000 nm, all with a single unit. **Features of ULTRIS X20 Plus:** - Capable of capturing hyperspectral imaging data in video format - Equipped with two imaging sensors - Adds a panchromatic sensor to the "ULTRIS X20" using light field technology - High resolution - Panchromatic resolution: 1880×1880 px, spectral resolution: 410×410 px (168,100 spectra) - Compact and lightweight (630g) The "ULTRIS X20 Plus" is a snapshot-type camera that can obtain a complete spectral data cube in seconds without scanning, making it suitable not only for UAV use but also for use as a video hyperspectral camera in laboratories and field settings.
Drone-compatible, compact, lightweight VNIR hyperspectral camera. For remote sensing, precision agriculture, and vegetation analysis.
The BlackBird V2 is a drone-compatible hyperspectral camera capable of simultaneously capturing high-resolution, high-spectral-resolution hyperspectral images (HSI) in the wavelength range of 500 to 1,000 nm, from visible to near-infrared (VNIR), along with RGB images. ■ A compact and lightweight hyperspectral camera designed for drones This model is specially designed for easy integration with DJI's Matrice 200 and 300 series drones. Connecting to the drone via the DJI Skyport interface is also straightforward. ■ User-friendly with a wealth of features - Can be operated via remote control. - Functions such as remote camera trigger, live streaming of RGB images, and flight planning can be used with the DJI Pilot App. ■ Measurement wavelength range: 500 to 1,000 nm ■ Compact size: 80×60×90 mm, lightweight: 790g (including gimbal) ■ 540×540px, 100 spectral bands ■ High signal-to-noise ratio in the NIR region ■ Equipped with an RGB sensor, allowing simultaneous capture of HSI (hyperspectral images) and RGB images in the same spatial context.
High resolution. A compact VNIR (470-900nm) hyperspectral camera suitable for research purposes such as mineralogy, pathology, material property evaluation, and art analysis.
The SNAPSCAN VNIR from imec is a compact and lightweight hyperspectral camera that can quickly acquire high-resolution hyperspectral data without the need for external moving parts, thanks to its built-in scanning mechanism. ■ Wavelength range: VNIR (470-900nm) ■ Snapshot capability The built-in scanning mechanism allows for snapshot imaging without the need for external moving parts. ■ High resolution (up to 7MP, 150 spectral bands) ■ High signal-to-noise ratio An active cooling system and advanced software features achieve a high signal-to-noise ratio. ■ Compact and lightweight < Evaluation Kit > In addition to the hyperspectral camera, an evaluation kit is also available, which includes key components such as lighting, tripod mounts, and analysis software.
【Suitable for OEM】Ultra-compact and low-cost. A hyperspectral camera capable of video recording.
【Minimum Size of Video Hyperspectral Camera UTLRIS】 - Ultra-compact: 29×29×49 mm - Ultra-lightweight (126 g) - Snapshot-type hyperspectral camera based on light field technology. - Capable of video recording - Covers a wavelength range of 450–850 nm (VNIR region) Suitable for OEM with 【Ultra-compact & Lightweight】 × 【Low Price】 - Opens up new markets for hyperspectral imaging in various industrial fields such as food, industry, medical, and recycling. The ultra-compact and lightweight UTLRIS 5 is also suitable for use with UAS.
Mobile-type hyperspectral camera that easily and quickly acquires VNIR (500-1000nm) spectral data on-site.
The HAIP BlackMobile hyperspectral camera is a handheld hyperspectral camera that allows for quick and easy acquisition of hyperspectral data on-site. ■ Mobile-type hyperspectral camera - Easy operation and result display on-site with a touch panel display. - Built-in LED lighting - Wavelength range: 500~1000nm, 100 spectral bands - High signal-to-noise ratio in the NIR region - Also equipped with a 4K RGB sensor
Industrial hyperspectral cameras support high frame rate applications in industrial fields such as food and recycling.
The HAIP BlackIndustry hyperspectral camera is a line-scan type hyperspectral camera designed for industrial applications. 【Hyperspectral Camera Optimized for Industry】 ■ High Frame Rate Ideal for industrial applications such as sorting in the food and recycling sectors, where items are transported rapidly on conveyor belts. ■ High Spatial Resolution ■ Wavelength Range 500-1,000 nm (VNIR V2) / 700-1,050 nm (NIR) / 900-1,730 nm (SWIR) ■ Dedicated line-type LED lighting is also available.
A high-resolution, snapshot-type hyperspectral camera that covers a wide wavelength range.
HinaLea Imaging's hyperspectral camera allows for easy shooting without the need for mechanical scanning. ■ Adopts Fabry-Pérot interference technology The spectral method employs the rare Fabry-Pérot interference technology among hyperspectral cameras, achieving both high resolution and high sensitivity simultaneously. ■ Supports a wide wavelength range 4250 VNIR: 400–1,000 nm 4300 VSWIR: 500–1,700 nm 4450 SWIR: 1,000–1,700 nm 4455 Extended SWIR: 1,120–2,100 nm ■ Designed with mass production in mind, offering high cost performance ■ User-friendly software An intuitive and easy-to-use application software allows for exploration and classification of images obtained with the hyperspectral camera. It can be used for a wide range of applications, including laboratory use, environmental monitoring in the field, and industrial applications.
A hyperspectral camera capable of generating spectral images with a high image resolution of 1000 × 1000 px.
The "Hyperspectral Camera ULTRIS XM" is an innovative hyperspectral camera based on light field technology. It is equipped with a 24MP CMOS sensor, allowing for the acquisition of high-resolution data. You can select a 500nm range suitable for your application between 385 and 1000nm. **Features of ULTRIS XM** - Capable of capturing hyperspectral imaging data in video format - Measurement wavelength range: 400~900nm (standard model) *Note: A 500nm range can be selected between 350 and 1000nm - 51 spectral bands - High resolution - 1000×1000 pixels - Compact (40 × 40 × 47 mm), lightweight (150 g) - USB3.0 The ability to change lenses via a C-mount adapter further enhances versatility for various applications.
A video hyperspectral camera capable of capturing near-infrared wavelengths.
The "Hyperspectral Camera ULTRIS SWIR 1" is an innovative hyperspectral camera based on light field technology. It can be used in the shortwave infrared range of 980 to 1650 nm and supports high-speed operation at a frame rate of 80 fps. 《Features of ULTRIS SWIR 1》 - Capable of capturing hyperspectral imaging data in video format - Measurement wavelength range: 980~1650 nm, 38 spectral bands - 200×200 pixels - Compact (30 × 30 × 85 mm), lightweight (140 g) - USB 3.0 Its compact size allows it to be utilized in spaces with limited room, such as laboratories and field settings.
High performance and lightweight compact design. Widely active in machine vision, medical fields, agriculture, and more.
We offer hyperspectral cameras from Aimec, which combine compact design with high performance suitable for industrial applications. The "Snap Scan" type, equipped with a built-in scanning mechanism and cooling system, enables high-quality and speedy hyperspectral imaging. Additionally, the unit-type "Snapshot" model supports flexible parameter settings and can also generate videos. 【Product Lineup】 ◎ Snap Scan Type ■ Creates high-quality hyperspectral cubes in a few hundred milliseconds ■ Available as a demo kit, allowing for high-level testing with lighting, tripod mounts, and user-friendly software ◎ Snapshot Type ■ Easy-to-use hyperspectral image evaluation unit ■ Quickly acquires hyperspectral image data from objects ■ Applicable in machine vision, medical fields, agriculture, and more *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Newly designed spectrometer equipped with small satellite-mounted hyperspectral sensor technology!
The "CosmosEye HSC1702" is a two-dimensional imaging device that can simultaneously capture light information (spectrum) representing the properties of an object within an image. While digital cameras capture images in three colors (RGB), this device can decompose and finely identify colors (spectra) across 141 bands from near-ultraviolet to near-infrared. Additionally, its optical analysis function allows for the detection of the physical properties and conditions of the object, as well as any slight changes. 【Features】 ■ High image quality ■ High wavelength resolution ■ Easy sensitivity adjustment ■ Bright optical system ■ Customizable optical system specifications *For more details, please download the PDF or contact us.
Our company leverages the extensive technology and experience accumulated over 20 years to propose the most suitable equipment tailored to our customers' needs across various industries and fields.
● Hyperspectral Camera The base technology, the hyperspectral camera, offers a rich lineup that can be selected based on wavelength range, frame rate, wavelength resolution, and image resolution. It also accommodates special specifications such as high-sensitivity measurements and high-speed measurements. - High color separation possible through wavelength analysis - Conversion between XYZ, Lab, and CMY - Line analysis and area analysis possible ● Imaging Spectroscopy System The imaging spectroscopy system, which excels in research and development as well as product inspection, provides an all-in-one device that caters to various applications. We offer one-stop support from algorithm development and software creation to mechanical design for applications.
We would like to introduce a device that captures color information from printed surfaces with high resolution.
● High-precision image color measurement is possible This device is a scanner-type colorimeter that measures and analyzes image color information with patterns, such as printed surfaces, copied surfaces, and photographs, using a direct spectrophotometric method. A colorimeter refers to a spectrophotometer that can perform color analysis directly from the image surface. ● Easy data acquisition using a scanner method Data acquisition is performed by horizontally moving the measurement object placed face down on a glass surface, using a spectrophotometer with an imaging spectrometer from below. The lateral movement to the measurement points on the measurement object is achieved by the movement of a measurement head that integrates the imaging spectrometer and the light irradiation device. ● High reliability through the use of a high-performance camera To enhance the reliability of the measurement data, the camera connected to the imaging spectrometer is of the cooling type with a CMOS sensor, which excels in data stability and reproducibility.
Weighing only 1.3 kg, it is easy to carry. Remote shooting is possible with the Wi-Fi function. Software for visualization processing and model creation is also included.
The 『SPECIM IQ』 is a portable hyperspectral camera weighing 1.3 kg, capable of operating in the 400 to 1000 nm range. With a compact size of 91 mm in height and 207 mm in width, it also features a touchscreen. Remote shooting is possible through Wi-Fi for remote operation. Using the included software "IQ Studio," visual processing and model creation of the acquired hyperspectral data can be easily performed. 【Application Examples】 ◎ Detection of foreign substances, discoloration, and mold in food ◎ Detection of food biting and poor sealing in packaging ◎ Sorting of plastics and waste ◎ Measurement of the ratio of components in pharmaceuticals ◎ Management of coating thickness ◎ Color inspection of displays and color control in printing ◎ Automation in mining and efficient exploration of oil *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Hyperspectral camera Specim FX10 operating in line scan mode in the visible and near-infrared regions.
The hyperspectral camera Specim FX10 operates in line scan mode in the visible and near-infrared (VNIR) range. There is the Specim FX10 for the 400–1000nm range and the color-optimized Specim FX10c camera for the 400–780nm range. The Specim FX10 camera is ideal for the following applications: • Vegetation and agriculture • Phenotyping • Color and density during printing • Inspection of displays and light sources • Food quality
[Drone Compatible] Hyperspectral Camera Developed for UAVs
Hyspex MjoInir (Mjölnir) is equipped with all the systems necessary for aerial photography with hyperspectral cameras. It is compatible with various UAVs and also supports tripod photography on the ground. The system allows for communication control from the ground. ■Features: Provides solutions compatible with drones - Measurement wavelength range: 400~1000nm / 970~2500nm / 400~2500nm - Ground control software for advanced flight planning - High stability against wind - Built-in battery - Software integrated with drone cameras
High-speed, robust, and high-performance hyperspectral camera suitable for industrial applications.
Hyspex Baldur is a hyperspectral camera equipped with high speed, flexibility, and robustness. ■ High Speed Capable of 1000 fps. *Even higher speeds are possible depending on specifications. We also offer high-speed software and inline integration support software, making it suitable for industrial applications.
Compact and lightweight VNIR hyperspectral camera
The HAIP BlackBullet V2 hyperspectral camera is a compact and lightweight hyperspectral camera designed to accommodate various applications such as laboratories, fields, and UAVs. - Compact size (80×60×90 mm) - Measurement wavelength range: 500~1,000 nm - 540×540 px, 250 bands - High signal-to-noise ratio in the NIR region - Equipped with an RGB sensor, allowing simultaneous acquisition of HSI and RGB images in the same spatial context Its small and lightweight design allows for easy implementation on various platforms, including field measurements using UAVs or tripods, laboratory measurements, and attachment to scan rail systems.
